- Priming for the Remmers WDD system
- Adhesion primer for old coatings and ceramic tiles
- Priming for DIBt-approved systems for residential areas
- Excellent adhesion to many substrates
- Vapor permeable
- Plasticizer-free, nonyl and alkylphenol-free
- Physiologically harmless in the reacted state
Apply the material full and sat on the surface. Spread with suitable tools, e.g. rubber squeegee, then roll again with an epoxy roller so that the ruts in the surface of the substrate are completely filled. It may be necessary to apply several layers.
Consumption approx. 0.15 – 0.25 kg/m2 binder (depending on the substrate)
Tools / cleaning
Brush, rubber squeegee, epoxy roller, mixing device Correct data can be found in the tool range. Clean tools and any contamination immediately with water while the material is still fresh. When cleaning, observe the protective measures and regulations for waste disposal.
Download the floor coating installation manual before applying a floor coating. This way you can get started with applying the floor coating step by step. You will also receive the manual by email after your order. More tips and inspiration? Visit our YouTube page for all of our helpful how-to videos.
No tools at hand?
Quickly put together your tool packages for all types of floors here.
A sleek subfloor is an absolute requirement for a sleek and high-quality end result. For repairs to the subfloor, use Epoxy repair mortar and/or Epoxy putty . If you want to level out the floor, this can be done with Epoxy Scratch Coat HQ . If you want to level the floor, you can do this with Leveling .
Free* RAL Fan
Order the color chart and choose the perfect color for your project.