Wilsor DD lacquer transparent

Application

Clear yacht lacquer for protecting polyester, wood, epoxy surfaces. Contains a UV filter to protect the underlying epoxy from yellowing.

Instructions

1. Sand the surface and make sure that it is dry and free of dust and grease.
2. Add hardener: 25% based on the weight of the resin. Mix the liquids well.
3. Apply the DD lacquer to the surface using a brush or roller.
4. After 24 hours, the lacquer layer can be painted over with itself.
5. Do not apply this product wet-on-wet and avoid higher film thicknesses to avoid problems with sagging and drying.

Consumption

Approximately 7m2 per kg.