Application
Ideal as a wear-resistant, colored and seamless floor coating for cement and gypsum-based substrates.
Arturo EP3010 Floor and Wall Coating is suitable for light to medium duty floors, such as in:
- Warehouses
- Storage and technical areas
- Technical rooms
- Stores
- stables
Product Features / Benefits
- Silky matt finish
- Water vapor permeable
- Colored
- Water dilutable up to a maximum of 10%
- Easy to clean
- Low odor
- Dust binding
- Solvent-free
- Easy to apply
Also available in non-slip version.
System Structure
As a floor coating:
- Primer: 1st coat of Arturo EP3010 with 10% water
- Floor coating: 2nd coat of Arturo EP3010 with 5% water
As a wall coating:
- Primer: 1st coat of Arturo EP3010 with 2.5-5% water (depending on substrate)
- Wall coating: 2nd coat of Arturo EP3010 with 2.5% water
For anti-slip: add the anti-slip powder to the second coat before adding water. Refer to the product data sheet for instructions.
Consumption
Approximately 150-250 g/m², depending on the substrate. For a gritted antiskid system: approx. 700-1000 g/m².
Manual
Download the floor coating installation manual for a step-by-step explanation. After ordering, you will also receive it by email. Also watch our YouTube videos for additional tips.
No tools?
Easily put together your tool kit for your flooring project.
Substrate
A level subfloor is essential. Use Epoxy repair mortar for holes and cracks, Epoxy putty for cuts and minor unevenness, Epoxy Scraper HQ for leveling out and Leveling for leveling.
Free* RAL range
Order the RAL color chart and choose the right color for your project.
Reviews
There are no reviews yet.