De IJssel Variopox Finishing putty (tube) T5

Features

• Suitable for filling holes and bumps, including below the waterline
• To be used as a finishing coat on Variopox Filler or Variopox LG Filler.
• Excellent adhesion to IJmopox ZF Primer, HB Coating and other epoxy putties
• Resistant to various chemicals
• Good sandability
• Semi-flexible, captures vibrations
• Available in a tube suitable for standard sealant gun

Appearance

White – Matte

Technical properties (at 20 °C and 50% R.H.)

• Density: approx. 1.7 g/cm³ (mixed product)
• Solids content: approx. 100% (volume)
• Dust dry after: approx. 2 hours (at ±15 °C)
• Fully cured after: 1 day (see additional info)
• Can be repainted after: min. 12 hours (at ±15 °C), max. unlimited if clean, grease-free and sanded
• Shelf life: minimum 12 months in original, unopened container, stored cool and frost-free
• Flash point (DIN53213): base component 150 °C, hardener component 112 °C

Efficiency

At a dry film thickness of 500 μm: approx. 1.2 m²/kg

The practical yield depends, among other things, on the shape of the object, the condition and structure of the surface, application method, weather conditions and skill of the processor.

Substrate condition and temperature

Steel: dry, rust and grease free, blasted to ISO Sa2½, pretreated with IJmopox ZF Primer

Wood: dry, grease-free, max. 12% moisture content, pretreated with Variopox Injection Resin and sanded with P120

Polyester: dry, grease-free, old coats of paint removed, sanded with P120 and degreased with Double Coat Degreaser

Other substrates: free of old paint layers, oil, grease and loose parts, preferably treated with IJmopox ZF Primer

Variopox putty: dry, grease-free, sanded with P120-180

Minimum application temperature: 5 °C. Substrate temperature must be at least 3 °C above dew point.

User Manual

Mix both components thoroughly before use.

Mixing ratio: 67 parts base : 33 parts hardener (both by weight and volume)