UZIN KE 2000 SL / 14 kg

Description and Application:

Highly low-emission, current-conducting wet and semi-wet dispersion adhesive for laying current-conducting PVC, rubber, linoleum and textile floor coverings on absorbent and dense substrates. This adhesive has a short waiting time and is suitable for heavy loads. Only applicable indoors.

Suitable for:

• Flowable PVC and rubber up to 4 mm thickness in webs and tiles (use sealant spreader 23/80)
• Flow-conductive carpet (use sealant iron 23/TL)
• Current conductive linoleum in strips and tiles up to 4 mm thick (use sealant spreader 23/TL)
• Heavy load in homes, stores and industry e.g.:hospitals, operating rooms, computer rooms, production areas etc.
• Swivel castor load rollers according to DIN EN 12529
• Wet, shampooing and spray extraction cleaning

Suitable on:

• Absorbent, leveled substrates
• Dense, non-absorbent substrates, e.g. screeds, UZIN KR 410
• Hot water underfloor heating

Features/Product Benefits:

This ready-to-use current-conducting adhesive with high end adhesion contains current-conducting carbon fibers, which stabilize the adhesive and protect the covering from impression sensitivity when wet. The fiber addition also provides protection against residual impressions.

Components: Polymer dispersion, preservatives, carbon fibers, mineral aggregates, additives and water.

• Pronounced constant conductivity
• Light atomization.
• Pronounced thread image
• Quick initial adhesion
• Very low consumption
• High shear strength.
• Solvent-free.
• EMICODE EC 1 PLUS / very low emission.
• RAL UZ 113 / Environmentally friendly, very low emission.