FLOW RESIN Polyaspartic Fast Floor Coating

A specially developed, fast-curing floor coating based on Polyaspartic.

The Flow Resin Polyaspartic Fast Floor Coating is a two-component, glossy, solvent-free finish coat with limited color choices. This coating is ideal for sleek, aesthetic floors in restaurants, cafes, hotels, auto garages, balconies and galleries with medium loads, among others. After 3 hours, the floor is walkable and overcoatable, making the product well suited for outdoor applications or areas that need to be returned to service quickly. The coating is fully UV-resistant and plasticizer-resistant, making it perfect for auto garages and showrooms as well.

Application

Suitable as a colored finishing coat for areas with light to medium loads, such as:

• Restaurants
• Hotels
• Car garages
• Garages
• Parking garages
• Showrooms
• Balconies
• Terraces

*Formedium to heavy duty areas, Flow Resin Epoxy Cast Flooring Industry is recommended.

(Technical) Features

• Glossy finish (matte possible with Flow Resin PU Topcoat)
• Seamless and liquid-proof
• Rapid processing required
• Increase wear resistance with anti-slip grit
• Good wear resistance
• Solvent-free
• Easy to clean
• Excellent coverage
• Good mechanical resilience after curing

Consumption

Consumption depends on the substrate, color and application method. For a flat surface, dark color and application with a nylon roller, consumption is approximately 250 g/m². With an uneven substrate, light color or application with floor squeegees and crosswise rolling this can increase to approximately 400 g/m². When using anti-slip, consumption increases by approximately 100-150 g/m².

THIS PRODUCT REACTS VERY QUICKLY – POUR OUT THE MATERIAL IMMEDIATELY AFTER MIXING AND SPREAD IT QUICKLY WITH A ROLLER.

Substrate preparation

No primer is required when applied in two coats, provided the substrate is dry and dust-free. Remove cement and concrete residues by sanding or grinding. Dense substrates such as concrete must be roughened by dust-free blasting or intensive sanding. Contamination should be chemically cleaned and sanded. Oil stains can be treated with cat litter or ammonia. Vacuum the floor thoroughly with an industrial vacuum cleaner. Repair small holes and cracks with Flow Resin Epoxy putty. For quick repairs, polyester putty can be used and the coating can be applied after only 1 hour. Larger damages should be repaired with Flow Resin Epoxy repair mortar.

Apply anti-slip

For a non-slip finish, first apply water-based universal bonding primer and sprinkle it completely with sand. After 6 hours, remove the excess sand, sand and vacuum the layer. Then the Polyaspartic Fast Floor Coating can be applied.

Note: As of Aug. 24, 2023, appropriate training is required for industrial or professional use.