FLOW RESIN Concrete Ciré Primer

1-component acrylic primer specially designed for pretreating the substrate before applying concrete ciré.

Consumption

Consumption: approximately 100 grams per m².

User Manual

• Make sure the surface is clean, dry, level and free of dust.
• Sand the substrate for better adhesion and carefully remove sanding dust.
• Apply one coat of primer to reduce substrate suction and optimize the adhesion of concrete ciré.
• Allow the primer to dry completely according to the manufacturer’s instructions (usually 1 to 2 hours).

Construction Concrete Ciré Floor System

• 1st coat: Epoxy primer for dense substrates
• 2nd layer: Epoxy scraping layer
• 3rd coat: Concrete Ciré Primer
• 4th layer: Concrete Ciré (1st layer)
• 5th layer: Concrete Ciré (2nd layer)
• 6th coat: PU transparent topcoat

Construction Concrete Ciré Wall System

• 1st coat: Concrete Ciré Primer
• 2nd layer: Concrete Cure (1st layer)
• 3rd layer: Concrete Ciré (2nd layer)
• 4th layer: PU transparent topcoat