FLOW RESIN PU Professional Topcoat is a semi-1K polyurethane coating with a transparent matte finish after curing. This topcoat is intended for professional use only.
The coating offers excellent chemical resistance. Refer to the chemical resistance list at the bottom of the page in the product appendices for detailed information.
Applications
Suitable as a finishing coat for the following floor systems:
- Flow Resin Epoxy Floor Coating PRO
- PU Cast Flooring House
- PU Cast Flooring Commercial
- Epoxy Flooring Industry
- Epoxy Floor Coating Transparent
- PU Floor Coating
- Epoxy Floor Coating Chemical Resistant
- Epoxy Alignment Paint
Technical properties
- Matte finish
- Seamless and liquid-proof
- Easy to apply
- Excellent chemical resistance
- Good cleanability
- Good flow properties
- High hardness
Consumption
Consumption depends on the structure of the substrate. Average consumption is 100 g/m². When anti-slip granules are added, this increases to approximately 110 g/m².
Preparation of the substrate
The substrate must be one of the flooring systems listed. Apply the top coat between 16 and 36 hours after applying the previous coat for optimum chemical adhesion. Make sure the substrate is dry and dust-free.
If the underlying floor has fully cured, it must first be sanded and thoroughly cleaned (free of dust and grease) before the top coat is applied.
Add anti-slip
For an anti-slip finish, mix transparent PU anti-slip beads through the top lacquer. These beads are almost invisible in the final result, but provide extra grip. Allow for an increased consumption of approximately 110 g/m².
Reviews
There are no reviews yet.