Ardex K60 latex-based levelling compound A+B

• Low Emission
• Cement-based
• Self-leveling
• Flexible
• Strong adhesion
• Applicable to virtually all building substrates without primer
• Ideal for critical substrates, renovation and repair work
• Waterproof and moisture-resistant – up to 15 mm in one layer, with sand up to 30 mm

Application: Indoor, on floors

Suitable for leveling and levelling:

• Dry screeds
• Floor heating systems with thin finishes
• Wood floors and wood chipboards
• Metal substrates
• Substrates with old, waterproof adhesive residues, levelling and mortar residues
• Calcium sulfate, cement, cast asphalt and terrazzo floors

Also suitable for existing tile and sheet materials and other critical mixed substrates, as a carpet pad for textile flooring, rubber, linoleum, PVC, CV, ready-made parquet and ceramic tiles.

Applicable in bathrooms and showers as a substrate for elastic floor coverings and ready-made parquet in combination with ARDEX SMP adhesive AF 460 MS, directly on sealing layers such as ARDEX S 7, S 8 Flow, 8+9 or SK 100 W TRICOM.

Directly applicable on ARDEX EP 2000 epoxy resin as a moisture barrier layer without sanding up to 5 mm thickness, with processing within 24 hours. Also suitable as a leveling layer on concrete floors and raw concrete ceilings for moistureproofing with ARDEX EP 2000 in normally loaded areas.

Self-leveling and crack-free, even in thicker layers.

Prevent cracking

Do not apply the leveling layer tightly against the wall to avoid cracks. Use an edge strip to apply the floor floating. The elastic edge strip absorbs expansion and prevents cracking. In addition, the use of a primer under the leveling layer is recommended.