Professional, plasticizer-resistant topcoat with high resistance to rubber streaks and car tires. Flow Resin PU Plasticizer Resistant Topcoat is a transparent, glossy polyurethane topcoat that provides optimal protection.
Please note that despite the plasticizer resistance, caution is still required with warm or hot car tires.
Applications
To be used as a top coat on such surfaces as:
- Epoxy Floor Coating PRO
- PU Cast Flooring House
- PU Cast Flooring Commercial
- Epoxy Flooring Industry
- Epoxy Floor Coating Transparent
- PU Floor Coating
- Epoxy Floor Coating Chemical Resistant
- Epoxy Alignment Paint
Technical specifications
- Glossy appearance
- Seamless and liquid-proof
- Excellent chemical resistance
- Easy to clean
- Good flow properties
- High wear resistance
- Resistant to rubber streaks
- Resistant to car tire tracks
Consumption
Depending on the roughness of the substrate. Average consumption: 100 g/m².
Preparation of the substrate
The substrate must be one of the flooring systems listed. Apply the top coat within 16 to 36 hours after the previous coat for optimum adhesion. Make sure the substrate is dry and dust-free.
Is the undercoat fully cured? Then first sand and thoroughly dust and grease before application.
Anti-slip option for added safety
For an anti-slip finish, mix PU Anti-slip granules through the top lacquer. These transparent granules improve grip without affecting the appearance. Allow for an increased consumption of approximately 110 g/m².
Reviews
There are no reviews yet.