Owatrol Easy Surface Prep (ESP)

Problem-free Surface Preparation

ESP Easy Surface Prep makes it easy to quickly and effectively prepare surfaces for painting. The product provides excellent adhesion of both oil- and water-based paints and varnishes, and is suitable for indoor and outdoor use. Here’s how ESP simplifies your painting projects:

Easy to use and Fast drying

ESP forms an adhesive film on the surface, eliminating the need for sanding. It dries quickly, is virtually odorless and ideal for use in small or poorly ventilated areas. You can start painting after only 2 hours, saving time and effort.

Versatile in Use

ESP is perfect for a variety of applications, such as refurbishing kitchen cabinets, renovating bathrooms without removing tiles, or restyling furniture without sanding. It adheres to melamine, ceramics, lacquer, baked enamel and glass, among others, without affecting the existing finish.

Application Instructions

Make sure the surface is clean, dry and free of loose paint or dirt. Apply ESP with a lint-free cloth, brush or roller. Let it set for 5 minutes, then wipe lightly in one direction with a clean cloth to remove excess product. Then let it dry for 2 hours before painting. Has more than 7 days passed? Then reapply ESP.

Eco-friendly and Practical

ESP is safe to use and easy to clean with soap and water. Shake the product well before use and always use clean cloths to avoid contamination.

Choose ESP Easy Surface Prep for fast, easy and durable surface preparation without sanding or hassle.

User Manual

Surface preparation

Clean and dry the surface thoroughly. Remove grease, oil and loose paint. For stubborn dirt, use a green scouring pad or 00-steel wool soaked in ESP. Leave for 5-10 minutes, wipe clean and then follow standard instructions.

Supplies

• Lint-free cloth
• Brush
• Roller

Application

Apply ESP generously with a clean, dry cloth. If the product pulls back or does not adhere well, the surface is not yet clean enough. Clean again and repeat the application. Leave on for 5 minutes and wipe off excess product in one direction. Let dry for 2 hours. You can paint within 7 days; then reapply.

Cleaning

Clean all materials used with soap and water.

Important Tips

• Shake well before use
• Do not dilute
• Check that the new paint is compatible with the existing finish
• Always use clean cloths and replace them regularly
• Do not mix used ESP with fresh ESP
• Not suitable for immersion