Stone Age Base Concrete Coating

For the desired end result, the Basebeton Floor is finished with the special Basebeton Coating (SA Basic-coat WB 2K-PU). This coating consists of two components: SA Basic-coat WB 2K-PU Component A and Component B. Mix component B with component A, shake or mix well, then pour the mixture through an MP 190 micron sieve. Then mix thoroughly again. Apply the coating with a nylon roller. Allow the floor to dry for at least five days before using. Consumption: approximately 100 grams per m².

Important!

After applying the Stone Age product, the floor – due to its specific composition – should never be taped off, even when the floor is already in use. This prevents disturbing prints and possible damage to the surface.