Application
- Primer for the Remmers WDD system
- Adhesive layer on old coatings and ceramic tiles
- Primer for DIBt-approved systems in residence halls
Features
- Adheres excellently to various substrates
- Vapor permeable
- Free of plasticizers, nonyl and alkyl phenols
- Physiologically harmless after curing
Primer
Apply the material full and opaque to the substrate. Spread with suitable tools, such as a rubber floor squeegee, and roll after with an epoxy roller so that all pores in the substrate are filled. Apply multiple coats if necessary.
Consumption: approx. 0.15 – 0.25 kg/m² binder (depending on substrate)
Tools / Cleaning
Use brush, rubber floor squeegee, epoxy roller or mixing device. Refer to tool program for proper tools. Clean tools and any contamination immediately with water while material is still wet. Observe protective measures and waste disposal.
Handy manual
Download the floor coating installation manual for a step-by-step explanation. You will also receive it by e-mail after your order. More tips and inspiration? Check out our YouTube page of instructional videos.
No tools?
Easily assemble your tool kit for any type of floor.
Substrate
An even subfloor is essential for a tight end result. For repairs, use Epoxy repair mortar or Epoxy putty. For leveling, use Epoxy Scraping Layer HQ, and for leveling, use Equalization.
Free* RAL range
Order the RAL color chart and choose the right color for your project.
Reviews
There are no reviews yet.