Ardex Fix Superfast Equalization

• Cementitious
• Repair and leveling layer with finishing function for floor N
• Can be coated after 30 minutes
• Primer unnecessary
• Fast curing
• Fast drying
• Finish to 0 mm
• Suitable for filling holes and slots
• For leveling out and correcting height differences and unevennesses
• Ideal for local leveling

Suitable for repairing substrates prior to flooring installation.

To be used for filling holes and slots.

For leveling out height differences in floors, chipboards and other building boards.

For leveling unevenness on cement screeds, anhydrite floors, poured asphalt, concrete floors, chipboard and tile floors.

Also suitable for local leveling to correct faults and ridges in existing or new leveling layers.

Applicable as a leveling layer in thicknesses from 0 to 4 mm. Suitable for indoor use only.

Prevent cracking

A leveling layer applied tightly against the wall increases the risk of cracks. To avoid this, it is recommended that the floor be applied floating. This can be done by placing an edge strip before leveling. This elastic strip catches expansion of the floor and helps prevent cracking. In addition, the use of a primer under the leveling layer is strongly recommended.