Pallmann P4 1C STP parquet adhesive
 88,19 Add to cart

Pallmann P4 1C STP parquet adhesive


check Adhesive residues on parquet can be removed
check Very good score
check Hard elastic groove

Business customer? We offer a discount for a large order. Read more here, and request a quote directly.

1C STP adhesive that combines the powerful elasticity of a PUR adhesive with the advantages of modern STP technology. Solvent and water-free, therefore highly processable and without harmful swelling effect on parquet.

Application Pallmann P4 parquet adhesive

1-component STP multi-layer parquet adhesive with hard-elastic adhesive groove for fast and efficient installation of multi-layer parquet. For indoor use.


  • Cement screeds, calcium sulfate screeds or concrete
  • new, firmly screwed chipboard P4 – P7 or OSB 2 – OSB 4 boards
  • Filling compounds for multilayer parquet flooring
  • Hot water underfloor heating

Product advantages / properties Pallmann P4 parquet adhesive

  • Hard elastic groove
  • Very good score
  • Adhesive residues on parquet can be removed
  • Replacement adhesive according to TRGS 610
  • GISCODE RS 10 / Solvent-free adhesive containing methoxysilane
  • EMICODE EC 1 PLUS / Very low emission

Substrate preparation

The substrate must be level, sound, load-bearing, dry, free from cracks, clean and free from materials that would impair adhesion. Substrate to be inspected in accordance with applicable standards and bulletins, and report concerns if deficiencies are found. Cement and calcium sulfate screeds must be sanded and vacuumed (cleaning sanding). When working with parquet, it is recommended to check the surface particularly carefully. Remove adhesion-reducing or unstable layers, e.g. release agents, loose adhesive, filler, coating or paint residues, etc., e.g. by brushing, grinding, milling or shot peening. Thoroughly vacuum loose parts and dust. Precoat very porous substrates with 1-component rapid primer Pallmann P104 Primer (note: drying time min. 1 hour). Uneven substrates with

Prime with universal primer UZIN PE360 NEW and fill with parquet filler PALLMANN P25 at least 3 mm thick to achieve increased evenness according to manufacturer’s instructions. All standard mineral substrates as well as well-set mastic asphalt screeds must always be primed with Pallmann P104 Primer.

Observe the product data sheets of the products used.


approx. 1,000 – 1,200 g/m2

More product information

Under the heading Documents and Downloads you will find further product information and safety instructions. A product information sheet will be emailed to you in the order confirmation.

Tips and tricks?

Visit our YouTube page, here you will find all practical teaching videos.

Free color fan?

You can order a free* color guide to find the perfect color for your project.

Additional information

Weight 1 kg


There are no reviews yet.

Be the first to review “Pallmann P4 1C STP parquet adhesive”